HiModel
WALKERA TWO-WAY 2.4G TELEMETRY MODULE FOR DEVO 12 TRANSMITTER WK-CTL01-D
| Working voltage | 5-6V |
| Power | ≤100mw |
| Size | 43.5 x 28x9mm |
| 4 temperature sensor ports | testing range -20 to 220 ℃ or -4.0 to 428°F |
| 3 voltage testing ports | testing range |
, , , , , , Specifications:, , , , , , , , , , , WALKERA Two-way 2.4G Telemetry Module for, DEVO 12 Transmitter, WK-CTL01-D, Current: , 2 RPM testing ports (RPM sensor is NOT included), 1 GPS port (GPS module is NOT included), 1 spare port (for future use), , ,
Includes/Requires: Includes: 1 x two-way telemetry module 4 x temperature ...HiModel
FRSKY TWO-WAY 2.4G MODULE W/LCD DISPLAY DHT-U
| Operating Voltage Range | 6.0V-13.0V |
| Operating Current | 50mA |
| Output Power | 60mW |
| Resolution | 3072 (>11bit) |
| V8 _Mode | Non-telemetry receivers (V8FR-HV, V8R7-HV, V8R7-SP, V8R4) |
| D_Mode | Telemetry receivers (D8R, D8RSP, D6FR, D4FR) |
, , , , , , Specifications:, , , , , , , , , , , Specification, Compatibility:, , ,
Features: Features 1) All-in-one combination of telemetry module,in-built display and ...HiModel
2.4G CORONA FHSS 8-CHANNEL RF MODULE & RX SYSTEM FOR FUTABA TRANSMITTER (RF CT8F FHSS,RX CR8F) V2
| FUTABA | 3PM,3PK, 7U, 8U, 8J, 9C , 9Z, and FN series. |
| HITEC | Optic 6, Eclipse 7. |
| WFLY | WFT09 WFT08 |
, , , , , , Specifications:, , , , , , , , , , , Type, , CT8F/FHSS, , Size, , 58.5x37.5x22mm(2.3"x1.47"x0.86"), , Weight, , 29g, , Output Power, , , Working Voltage, , 6V-13V, , Working current, , 100mA, , Resolution, , 1024, , Compitability, , , , ,
Includes/Requires: Includes: 1 x Futaba compatible RF module 2.4G CT8F ...1 Reviews
HiModel
2.4G CORONA FHSS 8-CHANNEL RF MODULE & RX SYSTEM FOR JR TRANSMITTER (RF CT8J FHSS, RX CR8F) V2
, , , , , , Specifications:, , , , , , , , , , , Type, , CT8J/FHSS, , Size, , 63.9X48.5X36.5mm(2.51"x1.9"x1.43"), , Weight, , 34.9g, , Output Power, , , Working Voltage, , 6V-13V, , Working current, , 100mA, , Resolution, , 1024, , Compitability, , JR:347,388,783,U8,PCM10,PCM10S,PCM10SX,PCM10IIS,8103,J9303,MX-22,MX-24S,PX,9XII Graupner:MC16, , , ,
Includes/Requires: Includes: 1 x JR compatible RF module 2.4G CT8J ...HiModel
2.4G CORONA DSSS 8-CHANNEL RF MODULE & RX SYSTEM FOR FUTABA TRANSMITTER (RF CT8F DSSS,RX CR8D) V2
| Operating Voltage Range | 6.0V-13.0V |
| Operating Current | 100Ma |
| Resolution | 10bit |
, , , , , , Specifications:, , , , , , , , , , , Specification For Transmitter Module type CT8F, Output Power---- 10mW-60mW, Specification for Receiver, CR8D---- Fast Spread 2.4G Receiver work with Corona RF.Module, Operating Voltage Range --- 4.8V-6V, Operating Current --- 30Ma, Specified Range --- 1.5km, Resolution ---10 bit, Latency ---- 22ms, Sensitivity -- -100dbm, Channel --- 8CH, , ,
Features: When you plan to update your Futaba/HITEC/WFLY FM Transmitter ...3 Reviews
HiModel
2.4G CORONA DSSS 14-CHANNEL RF MODULE & RX SYSTEM FOR FUTABA TRANSMITTER (RF CT14F, RX CR14)
| Type | CT14F DSSS |
| Size | 54X30X25MM |
| Weight | 27g |
| Operating voltage | 5V (Futaba) |
| Operating current | 150mA |
| Compatible with | FUTABA |
| Type | CR14 DSSS |
| Size | 37.5X52.5X16MM |
| Weight | 21g |
| Range | >1500M |
| Sensitivity | -100dbm |
| Operating voltage | 4.8V-6V |
| Operating current | 40mA |
| Compatible with | CT14F |
, , , , , , Specifications:, , , , , , , , , , , RF Module Specs:, Output Power: , Receiver Specs:, Number of Channel: 14, , ,
Features: The new lightweight, advanced technology unit has the following ...6 Reviews
HiModel
CORONA 2.4GHZ DIY DSSS TRANSMITTING MODULE AND RECEIVER CT8Z/CR8D
| Type | CT8Z DSSS |
| Size | 38.5*21.8*6.5mm |
| Operating voltage | 8V-13V |
, , , , , , Specifications:, , , , , , , , , , , Weight: 5g, Operating current: , Output Power:, ,
Features: Features of Corona 2.4GHz DIY transmitting module and receiver ...3 Reviews
HiModel
JC23 EVO 23CC 2-STROKE GAS/PETROL ENGINE
| Bore × Stroke | 33.3mm × 27mm |
| park plug | NGK CM6 or JC CM6 |
| Carburetor | Walbro special-designing vacuum pump diaphragm type duplex needle carburetor |
| Ignition system ： CDI battery ignition (battery voltage | 4.8v—6v) |
| Grease oil ratio ： 25-30 | 1 used during the break-in (the initial 2 working hours); 35-40 |
, , , , , , Specifications:, , , , , , , , , , , Engine Parameter:, Engine type ： 2—Stroke gasoline engine, Displacement：23cc, Max power ： 3.5hp/9500rpm, Practical running speed ： 1100 － 9500rpm, Net Weight ： 980g (incoulding CDI and muffler), Screw propeller dimension ： 16x8, 16x10, 17x8, 17x10, 18x8, * Spare parts for this engine are available for special ordering upon request, you can give us the part code and quantity via the help ticket system before we list those parts on our website., , ,
Features: - 2 Stroke air cooled single cylinder - Walbro ...HiModel
JC30 EVO 30CC 2-STROKE GAS/PETROL ENGINE
| Bore × Stroke | 36mm × 30mm |
| park plug | NGK CM6 or JC CM6 |
| Carburetor | Walbro special-designing vacuum pump diaphragm type duplex needle carburetor |
| Ignition system ： CDI battery ignition (battery voltage | 4.8v—6v) |
| Grease oil ratio ： 25-30 | 1 used during the break-in (the initial 2 working hours); 35-40 |
, , , , , , Specifications:, , , , , , , , , , , Engine Parameter:, Engine type ： 2—Stroke gasoline engine, Displacement：30cc, Max power ： 4.0hp/9000rpm, Practical running speed ： 1100 － 9000rpm, Net Weight ： 1100g (incoulding CDI and muffler), Screw propeller dimension ： 18*8, 18*10, 19*8, 19*10, , ,
Features: - 2 Stroke air cooled single cylinder - Walbro ...3 Reviews
HiModel
JC60 EVO 60CC 2-STROKE GAS/PETROL ENGINE
| Bore × Stroke | 45mm × 38mm |
| park plug | NGK CM6 or JC CM6 |
| Carburetor | Walbro special-designing vacuum pump diaphragm type duplex needle carburetor |
| Net Weight ：1740g (incoulding CDI and muffler) Engine | 1440g, pitts |
| Ignition system ： CDI battery ignition (battery voltage | 4.8v—6v) |
| Grease oil ratio ： 25-30 | 1 used during the break-in (the initial 2 working hours); 35-40 |
| Muffler interface inner size | 26 x 14.8mm (approx.) |
| Muffler mounting hole spacing | 40mm (approx.) |
, , , , , , Specifications:, , , , , , , , , , , , Engine Parameter:, Engine type ： 2—Stroke gasoline engine, Displacement：60cc, Max power ： 6.0hp/7500rpm, Practical running speed ： 1100 － 7500rpm, Screw propeller dimension ： 23*8, 23*10, 24*8, 24*10, 25*8, Testing video:, Fly video:, , ,
Features: - 2 Stroke air cooled single cylinder - Walbro ...1 Reviews
HiModel
JC120 EVO 120CC 2-STROKE GAS/PETROL ENGINE
| Bore × Stroke | 45mm × 38mm(twin) |
| park plug | NGK CM6 or JC CM6 |
| Carburetor | Walbro special-designing vacuum pump diaphragm type duplex needle carburetor |
| Ignition system ： CDI battery ignition (battery voltage | 4.8v—6v) |
| Grease oil ratio ： 25-30 | 1 used during the break-in (the initial 2 working hours); 35-40 |
, , , , , , Specifications:, , , , , , , , , , , Engine Parameter:, Engine type ： 2—Stroke gasoline engine, Displacement：120cc, Max power ： 12.5hp/8000rpm, Practical running speed ： 1200 － 8000rpm, Net Weight ： (incoulding CDI and muffler), Screw propeller dimension ：27x8, 27x10, 28x8, 28x10, 29x8, * Spare parts for this engine are available for special ordering upon request, you can give us the part code and quantity via the help ticket system before we list those parts on our website., , ,
Features: - 2 Stroke air cooled single cylinder - Walbro ...HiModel
2.4G 4-CHANNEL MICROLITE DSM2 /DSMX RECEIVER 410JST (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 4-Channel Full-Range DSM2 Receiver |
| ◆ Modulation | DSM2 /DSMX |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (L xWx H) | 29x16x7mm |
| ◆ Voltage Range | 3.6-10v |
| ◆ Antenna Length Main RX | 29mm |
| General Notes | This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, ◆ Weight: 3g, ◆ 1.25Pitch JST servo connectors, Binding Procedure, 1. Put the binding harness into the Channel marked BIND. Next apply power to the receiver. Receiver’s LED should illuminate., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., The Spektrum brand is a trademark of Horizon Hobbies USA., , ,
Features: Key Features ◆ 4 channels ◆ Preset failsafe system ...HiModel
2.4G 9-CHANNLE DSM2 MICROLITE RECEIVER (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 9-Channel Full-Range DSM2 Receiver |
| ◆ Modulation | DSM2 |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (W x Lx H) | 30 x 50 x 13mm |
| ◆ Weight | 19g |
| ◆ Voltage Range | 4-10v |
| ◆ Brown-Out Voltage | 4.0v (Always supply power above this voltage) |
| ◆ Antenna Length Main RX | 30mm (2) |
, , , , , , Specifications:, , , , , , , , , , , Binding Procedure, 1. Put the binding harness into connector location marked BIND. Next apply power to the receiver. Both receiver and Satellite LED's should illuminate., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., General Notes:, Only one bind procedure is required on a new receiver. Repetitive binding provides no extra security. Always remember to remove the binding harness after successful bind is completed., , ,
Features: JR/SPEKTRUM Compatible Key Features ◆ 9 channels ◆ Patent ...2 Reviews
HiModel
2.4G 6-CHANNEL PARK FLYER RECEIVER AR6100E (JR/SPEKTRUM COMPATIBLE)
| * Type | Park flyer, Foamies, Up to 400 class helis |
| * Modulation | DSM2 |
| * Band | 2.4 GHz |
| * Dimensions (WxLxH) | 20mm x 36mm x 11.6mm |
| * Weight | 4.9 grams |
| * Voltage Range | 3.5v - 9.6v |
| * Antenna Length | 2 @ 30mm each |
, , , , , , Specifications:, , , , , , , , , , , * # of Channels: 6, How to bind?, 1.with the power off, plug the bind plug into the BATT port., 2.power on the receiver. if powered by a separate battery,plug the battery into any unused port., 3.Position the transmitter's control sticks and switches in the desired fail-safe positions(normally low throttle and all other controls at netural)., 4.press and hold the bind button on the back of the transmitter while turning on the transmitter. the button will flash for several seconds, then the LED on the transmitter and receiver will remain solid on, indicating a successful bind., 5.remove the bind plug to prevent the system form rebinding the next time the power is turned on., , ,
Features: The AR6100e weighs less than 4.9 grams. The AR6100e ...2 Reviews
HiModel
2.4G 6-CHANNEL MICROLITE DSM2 /DSMX RECEIVER SBUS610E (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 6-Channel and 1 SBUS output Full-Range DSM2 Receiver and 1 SBUS output |
| ◆ Modulation | DSM2 /DSMX |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (L xWx H) | 50x30x13mm |
| ◆ Voltage Range | 3.6-9.6v |
| ◆ Antenna Length Main RX | 30mm*2 |
| General Notes | This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, ◆ Weight: 8g, Binding Procedure, 1. Put the binding harness into connector location marked BIND. Next apply power to the receiver., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., The Spektrum brand is a trademark of Horizon Hobbies USA., , ,
Features: Key Features ◆ 6channels ◆ 1channels SBUS output ◆ ...3 Reviews